武漢理工大學材料科學與工程學院研究生導師：劉凱

• 2025考研復試標準班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 武漢理工大學2026考研專業課復習資料「真題▪筆記▪講義▪題庫」

一、姓名：劉凱

二、基本情況：

1、出生年月：1987年2月

2、學位：博士

3、職稱：副教授

4、工作院系：材料科學與工程學院

三、教育經歷(從大學開始)：

2009/09 - 2014/06，華中科技大學，材料加工工程專業，博士

2005/09 - 2009/07，武漢理工大學，材料成型及控制工程專業，學士

四、工作經歷：

2016/10 - 現在，武漢理工大學，材料科學與工程學院，副教授、碩士生導師

2014/07 - 2016/9，武漢理工大學，材料科學與工程學院，講師

五、研究領域：

1、粉末材料激光選區燒結3D打印技術

2、粉床噴液3D打印技術

3、自由擠出3D打印技術

4、建材(陶瓷、水泥等)、航空航天、生物醫療、文化創意等領域3D打印應用技術

六、科研項目：

1、湖北省自然科學基金面上項目(2015CFB167)：復雜結構 SiC 陶瓷件增材制造技術基礎研究，10萬元，項目負責人，2015年-2017年。

2、中山市新型研發機構產業化項目(2016F2FC0021)：水泥基材料藝術品構件3D打印技術研發與應用，50萬元，項目負責人，2016年-2018年。

3、企業委托項目(20141h0451)：SiC陶瓷3D打印技術研究，60萬元，項目負責人，2014年-2016年。

4、材料成型與模具技術國家重點實驗室開放基金(P2017-002)：復雜形狀SiC陶瓷零件激光選區燒結/反應燒結復合成型關鍵技術研究，5萬元，項目負責人，2017年-2019年。

5、國家科技重大專項(2013ZX02104001-002)：IC裝備用高端陶瓷零部件的近凈成型技術，697萬元，主要技術負責人，2013年-2017年。

七、代表性論文及著作(不多于10項)：

1、Liu K, Sun H J, Shi Y S, et al.Research on selective laser sintering of Kaolin-epoxy resin ceramic powders combined with cold isostatic pressing and sintering Ceramics International. 2016, 42(9): 10711-10718. (SCI收錄)

2、Liu K, Shi Y S, Li C H, et al. Indirect selective laser sintering of epoxy resin-Al2O3 ceramic powders combined with cold isostatic pressing[J]. Ceramics International. 2014, 40(5): 7099-7106. (SCI收錄)

3、Liu K, Shi Y S, He W T, et al. Densification of alumina components via indirect selective laser sintering combined with isostatic pressing[J]. International Journal of Advanced Manufacturing Technology. 2013, 67:2511–2519. (SCI收錄)

4、He W T, Liu K, Wei Q S, et al. Numerical simulation of cold isostatic pressed alumina parts produced by selective laser sintering and part shape optimization[J]. Ceramics International. 2013, 39: 9683–9690. (SCI收錄

5、Song X H, Li W, He W T, Liu K, et al. Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications.International Journal of Advanced Manufacturing Technology. 2015,81：(1-4): 15-25. (SCI收錄)

6、Wang ZJ，Shi YS，HeWT，Liu K, et al. Compound process of selective laser processed alumina parts densified by cold isostatic pressing and solid state sintering: Experiments, full process simulation and parameter optimization.Ceramics International. 2015, 41(2): 3245-3253. (SCI收錄)

7、史玉升, 劉凱,李晨輝等. 氧化鋯零件選擇性激光燒結/冷等靜壓復合成形技術研究. 機械工程學報. 2014, 50(21): 118-123. (EI收錄)

8、史玉升,劉凱, 賀文婷等. 選擇性激光燒結/冷等靜壓復合制造高密度Al2O3異形陶瓷件的研究[J]. 應用激光.2013, 33:1-6

9、賀文婷, 魏青松, 劉凱等. 數值模擬在氧化鋁陶瓷SLS/CIP過程中的應用[J]. 材料科學與工藝. 2014,22(4):56-60

10、劉文廣, 史玉升, 劉凱等. 基于選擇性激光燒結技術的藝術瓷成形方法研究. 陶瓷學報. 2014, 35(4): 425-428.

八、聯系方式：

1、Tel：

2、E-mail：liukai19870222@163.com;victor_liu@whut.edu.cn

3、工作地址(實驗室)：材料學院大樓516室

備注：歡迎積極主動、勤奮刻苦，對材料科學、加工成形、3D打印感興趣的同學加入!

1.Name: Liu Kai

2.Brief introduction:

1)Date of birth: 02/1987

2)Degree:Ph.D

3)Title: Associate Professor

4)Working department: Manufacturing and Processing of Materials，School of MaterialsScience and Engineering.

3.Education experience(after entering university):

2009.9- 2014.6

Doctor of Material Processing Engineering,

School of Materiasl Science and Engineering,

Huazhong University of Science andTechnology.

2005.9-2009.7

Bachelor of Material Processing and Control Engineering,

School of Materials Science and Engineering,

Wuhan University of Technology.

4.Working experience:

2016.10- present Associate Professor of Material Processing Engineering, School of Material Science and Engineering, Wuhan University of Technology

2014.7- 2016.9 Lecturer of Material Processing Engineering, School of Material Science and Engineering, Wuhan University of Technology

5.Research field(no more than 3):

1) Powder based laser selective sintering technology

2) Powder based 3DP technology

3) Free extrusion 3D printing technology

4)3D printing application technology in building materials (ceramics, cement, etc.), aerospace, biomedical, cultural and creative fields

6.Research project(no more than 5):

1) Project of Natural Science Foundation of Hubei Province(2015CFB167):Basic research on the manufacturing technology of complex structure of SiC ceramic parts，100,000 RMB, Principle Investigator，2015-2017.

2) Enterprise project(20141h0451)：Research on 3D printing technology of SiC ceramics，600,000 RMB, Principle Investigator，2014-2016.

3) Open fund of Key Laboratory of refractory materials and metallurgy(G201609)：Basic research on key technology of high temperature SiCceramic selectivelasersintering of complex structure, 50,000 RMB, Principle Investigator，2016-2017.

4) Independent innovation research foundation of Wuhan University of Technology(2015IVA002)：Research on laser 3D printing ofsilicon carbide ceramic and its densification law，50,000 RMB, Principle Investigator，2015-2016.

5) Major national science and technology(2013ZX02104001-002)：Near net shaping technology of high-end ceramic parts for IC equipment，6970,000 RMB, Main Technical Person，2013-2017.

7.Representative papers and works(no more than 10):

1) Liu K, Shi Y S, Li C H, et al. Indirect selective laser sintering of epoxy resin-Al2O3 ceramic powders combined with cold isostatic pressing[J]. Ceramics International. 2014, 40(5): 7099-7106. (SCI)

2) Liu K, Shi Y S, He W T, et al. Densification of alumina components via indirect selective laser sintering combined with isostatic pressing[J]. International Journal of Advanced Manufacturing Technology. 2013, 67:2511–2519. (SCI)

3) He W T, Liu K, Wei Q S, et al. Numerical simulation of cold isostatic pressed alumina parts produced by selective laser sintering and part shape optimization[J]. Ceramics International. 2013, 39: 9683–9690. (SCI)

4) Song X H, Li W, He W T, Liu K, et al. Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications.International Journal of Advanced Manufacturing Technology. 2015,81：(1-4): 15-25. (SCI)

5) Wang ZJ，Shi YS，HeWT，Liu K, et al. Compound process of selective laser processed alumina parts densified by cold isostatic pressing and solid state sintering: Experiments, full process simulation and parameter optimization.Ceramics International. 2015, 41(2): 3245-3253. (SCI)

6) Shi Y S, Liu K, Li C H,et al. Study on compound forming technology of zirconia parts by selective laser sintering/cold isostatic pressing. Journal of Mechanical Engineering. 2014, 50(21): 118-123. (EI)

7) Shi Y S, Liu K,He W T,et al. Study on the high density of Al2O3ceramic parts fabricated by selective laser sintering/cold isostatic pressing.[J]. Applied laser.2013, 33:1-6

8) Chen Y X, Liu K, Wei Q S, et al. Simulation and verification for the densification process of alumina powder by Hot Isostatic Pressing, Powder metallurgytechnology.2013, 31:174-179.

9) He W T, Wei Q S, Liu K, et al. Numerical simulation for the process of alumina ceramic in Selective Laser Sintering/Cold Isostatic Pressing process[J]. Materials science and technology.2014,22(4):56-60.

10) Liu W G, Shi Y S, Liu K et al. Research on the forming of art ceramics based on selective laser sintering technology. Journal of ceramics. 2014, 35(4): 425-428.

8.Contact information:

1) Tel:

2) E-mail: liukai19870222@163.com;victor_liu@whut.edu.cn

3) Location of lab: Room 516 in School of Material Science and Engineering office building