武漢理工大學

一、姓名：毛華杰

二、基本情況：

1、出生年月： 1962-10-26

2、學 位：碩士

3、職 稱：教授

4、工作院系：材料科學與工程學院，材料成形與加工系

三、教育經歷(從大學開始)：

1980.9～1984.6 武漢工學院 壓力加工專業本科學習

1987.9～1990.6 武漢工學院 金屬塑性加工專業碩士研究生學習

四、工作經歷：

1984.7～1987.8 武漢工學院機械工程二系鍛壓教研室任教

1990.6～1994.8 武漢工學院機械工程二系鍛壓教研室任教

1994.9～2000.4 武漢汽車工業大學材料學院材料成型及控制系任教

2000.5～ 武漢理工大學材料科學與工程學院材料成型及控制系任教

五、研究領域(不多于3個)：

精密成形與模具技術

汽車新材料與先進制造技術

材料成型及計算機應用

六、科研項目(不多于5項)：

斜齒圓柱齒輪旋轉精沖成形機理及工藝方法研究(國家基金項目51375356)

10000kN精沖壓力機(國家科技重大專項)

鋼軌焊縫精密銑削數控裝備關鍵技術研發(湖北省重大科技創新計劃項目)

軸承套圈冷輾精密成形技術研究及其產業化(廣東省重大科技專項)

商用車內外飾件材料工藝數據庫與設計專家系統(企業委托)

七、代表性論文及著作(不多于10項)：

1、Study of static recrystallization behaviors of GCr15 steel under two-pass hot compression deformation

Huajie Mao, Rui Zhang, Lin Hua, and Fei Yin

Journal of Materials Engineering and Performance JMEPEG(2015)24:930–935

2、A blank optimization design method for three-roll cross rolling of complex-groove and small-hole ring

JiadongDeng,Huajie Mao(Corresponding author)

International Journal of Mechanical Sciences 93(2015)218–228

3、Optimization design for bean structures of rail weld CNC fine milling machine based on Ansys Workbench

Mao Huajie, Shu Min, Li Chao, Zhang Baojun

Applied Mechanics and Materials Vols.716-717(2015)pp817-824

4、Influence of processing parameters on molding process in microcellular injection molding

Wei Guo, Huajie Mao(Corresponding author), Bei Li, Xiangyu Guo

Procedia Engineering 81 ( 2014 ) 670 – 675

11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014,

Nagoya Congress Center, Nagoya, Japan

5、Back propagation neural network based calculation model for predicting wear of fine-blanking die during its whole lifetime

Fei Yin , Huajie Mao(Corresponding author) , Lin Hua , Zhiqiang Gu

Computational Materials Science 59 (2012) 140–151

6、Warpage and Structural Analysis of Automotive Trim Based on FFD and CAE in Plastic Injection Molding

W.Guo H.J.Mao and Q.Xu

Advanced Material Research Vols. 314-316 (2011) pp 1282-1286(EI)

2011 International Conference on Advanced Design and Manufacturing Engining(ADME2011)

16-18 September,2011, Guangzhou, China

7、A hybrid of back propagation neural network and genetic algorithmfor optimization of injection molding process parameters

Materials and Design 32 (2011) 3457–3464

Fei Yin , Huajie Mao(Corresponding author) , Lin Hua

8、Back Propagation neural network modeling for warpage predictionand optimization of plastic products during injection molding

Materials and Design 32 (2011) 1844–1850

Fei Yin , Huajie Mao(Corresponding author), Lin Hua , Wei Guo Maosheng Shu

9、BP-GA-Based Multiobjective Optimization Method for Drawbead Design of B-pillar

Liu Jun, Mao Huajie, Yin fei,

2010 International Conference of Automotive Body Technology P395~404(2010-10)

10、Numerical Simulations and Optimization of B-pillar Forming Based on Different Binders

Liu Jun, Mao Huajie, Chen Rongchu

The 10th Asia-Pacific Conference on Engineering Plasticity and Its Applications P295—299(2010-11)

八、聯系方式：

1、Tel：027-51111666

2、E-mail：maohj@whut.edu.cn

3、工作地址(實驗室)：材料學院大樓404室