武漢理工大學

武漢理工大學材料科學與工程學院研究生導師黃健介紹如下：

一、姓名：黃健

二、基本情況：

1、出生年月：1982年10月       
2、學位：博士研究生
3、職稱：副研究員
4、工作院系：綠色建筑材料及制造教育部工程研究中心

三、教育經歷（從大學開始）：

2001/09–2005/07 華南理工大學，材料科學與工程學院，獲高分子材料與工程學士學位；
2005/09–2006/12，英國拉夫堡大學（Loughborough University），材料學院（IPTME），獲高分子技術碩士學位（M.Sc.）；
2006/12–2010/12，英國拉夫堡大學（Loughborough University），材料學院（Department of Materials），獲博士學位（Ph. D.）。

四、工作經歷：

2011 年4 月-2013 年12 月      武漢理工大學，綠色建筑材料與制造教育部工程中心，助理研究員；
2013 年12 月-今               武漢理工大學，綠色建筑材料與制造教育部工程中心，副研究員。

五、研究領域（不多于3個）：

聚合物功能化改性，功能型建筑節能材料、綠色混凝土外加劑

六、科研項目（不多于5項）：

1. 國家自然科學基金青年基金項目：光熱氧化條件下新型雙峰聚乙烯分子結構穩定性的研究（51303146，2014.1~2016.12）
2. 國家十二五科技支撐項目：功能化復合墻體板材應用技術研究（2011BAJ04B02，2011.1-2014.12）
3. 國家十二五科技支撐項目：低成本、低能耗建筑節能關鍵技術集成研究與示范（2011BAJ03B03, 2011.1-2015.12）
4. 國家十二五科技支撐項目：村鎮功能型建筑材料研發與集成示范（2012BAJ20B00, 2012.1-2015.12）
5. 企業橫向：綠色混凝土外加劑制備技術研究與開發戰略合作（20121h0294，2012.1-2014.12）

七、代表性論文及著作（不多于10項）：

1. Microstructure and Mechanical Properties of Poly (Vinyl Chloride) Modified by Silica Fume/Acrylic Core-Shell Impact Modifier Blends, Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27(5), pp886-891.
2. The Effect of Polypropylene Skin on the Properties and Structure of PE/PP Dual Layer Pressure Pipe, Polymer Engineering and Science, 2012, 52 (5), pp 1081-1088.
3. Effect of a Polypropylene Skin on the Hardness of Polyethylene Pipe, Advanced Materials Research, 2012, 578, pp 197-201.
4. Performance similarity of an SAE latex and VAc/E type redispersible powder on cement mortar used on an expandable polystyrene panel, Advanced Materials Research, 2013, 700, pp 195-198.
5. Preparation of Styrene-Acrylate Emulsion (SAE) Latex by Recycling Waste Expandable Polystyrene Foam,       Advanced Materials Research, 2013, 700, pp 199-203.
6. 氮-磷膨脹阻燃劑對聚苯乙烯泡沫的阻燃改性，武漢理工大學學報，2013, 35(9), pp 30-35.
7. 廢聚苯乙烯泡沫再生乳液對砂漿增粘增韌研究，武漢理工大學學報，2013, 35(9), 45-49.
8. 聚羧酸減水劑在C50混凝土中的應用研究，公路，2013, 4, pp 175-178.
9. 一種環保型高性能防水阻燃型抹灰砂漿及其制備方法，授權發明專利，ZL201210006483.7.
10. 一種水溶性不燃陶瓷防輻射涂料及其制備方法，授權發明專利，ZL201210006491.1.

八、聯系方式：

1、Tel： +86-13886156895
2、E-mail：JHuang@whut.edu.cn；3841644@qq.com
3、工作地址（實驗室）：武漢理工大學硅酸鹽建筑材料國家重點實驗室水混樓307室

1.Name: HUANG Jian
2.Brief introduction:
1)Date of birth: Oct 1982
2)Degree: Ph.D.
3)Title: Associate Researcher
4)Working department: The Green Building Materials and Manufacturing Engineering Research Center of Ministry of Education
3.Education experience(after entering university):
2001/09-2005/07, South China University of Technology, School of Materials Science and Engineering, Bachelor’s Degree on Polymer Materials and Engineering;
2005/09-2006/12, Loughborough University (UK), IPTME, M.Sc. on Polymer Technology with Extinction;
2006/12-2010/12, Loughborough University (UK), Department of Materials, Ph.D.
4.Working experience:
2011/04-2013/12 Wuhan University of Technology, The Green Building Materials and Manufacturing Engineering Research Center of Ministry of Education, Assistant Researcher;
2013 /12-present Wuhan University of Technology, The Green Building Materials and Manufacturing Engineering Research Center of Ministry of Education, Associate Researcher.
5.Research field(no more than 3):
Functionalization of Polymers, Functional Energy-Saving Materials for Architectures, Green Admixtures for Cement and Concrete.
6.Research project(no more than 5):
1. Research on Molecular Structure Stability of Novel Bimodal Polyethylene under Conditions of Photo Thermal Oxidation (51303146, 2014.1~2016.12).
2. The Twelfth Five-Year National Plan for Science & Technology: Research on Application Technologies for Functional Composite Panels Materials for External Wall (2011BAJ04B02, 2011.1-2014.12).
3. The Twelfth Five-Year National Plan for Science & Technology: Research and Demonstrations on Key Technology Integration of Building Energy Saving with Low Cost and Energy Consumption. (2011BAJ03B03, 2011.1-2015.12).
4. The Twelfth Five-Year National Plan for Science & Technology: Research and Integration Demonstrations on Functional Materials for Architectures in Suburb. (2012BAJ20B00, 2012.1-2015.12).
5. Industrial Projects: Research and Development on Preparation Technology for Green Cement and Concrete Admixtures. (20121h0294, 2012.1-2014.12).
7. Representative papers and works(no more than 10):
1. Microstructure and Mechanical Properties of Poly (Vinyl Chloride) Modified by Silica Fume/Acrylic Core-Shell Impact Modifier Blends, Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27(5), pp886-891.
2. The Effect of Polypropylene Skin on the Properties and Structure of PE/PP Dual Layer Pressure Pipe,Polymer Engineering and Science, 2012, 52(5), pp 1081-1088.
3. Effect of a Polypropylene Skin on the Hardness of Polyethylene Pipe,    Advanced Materials Research, 2012, 578, pp 197-201.
4. Performance similarity of an SAE latex and VAc/E type redispersible powder on cement mortar used on an expandable polystyrene panel, Advanced Materials Research, 2013, 700, pp 195-198.
5. Preparation of Styrene-Acrylate Emulsion (SAE) Latex by Recycling Waste Expandable Polystyrene Foam,Advanced Materials Research, 2013, 700, pp 199-203.
6. Flame Retardation Modificationon Polystyrene Foamby Nitrogen-phosphorus Intumesent Flame Retardant, Journal of Wuhan University of Technology, 2013, 35(9), pp 30-35.
7. Research on Tackifying and Toughening Modification on Cement Mortar by Emulsion Made from Waste Polystyrene Foam, Journal of Wuhan University of Technology, 2013, 35(9), 45-49.
8. Research on Application of Polycarboxylate Superplasticizer on C50 Concrete, Highway, 2013, 4, pp 175-178.
9. A Preparation Method for Environmental Friendly High Performance Fire-Retarded Water-Proofed Mortar, Chinese Patent,       ZL201210006483.7.
10. A Preparation Method for Water-Soluble Incombustible Radiation-Resistant Chinese Patent,ZL201210006491.1.
8. Contact information:
1) Tel: +86-13886156895
2) E-mail: JHuang@whut.edu.cn；3841644@qq.com
3) Location of lab: Room 307, Cement and Concrete Mansion, State Key Lab of Silicate Materials for Architectures, East Campus, Wuhan University of Technology.