武漢理工大學

武漢理工大學材料科學與工程學院研究生導師韓建軍介紹如下：

一、姓名：韓建軍

二、基本情況：

1、出生年月 1970年9月
2、學位：博士
3、職稱：研究員
4、工作院系：硅酸鹽建筑材料國家重點實驗室

三、教育經歷（從大學開始）：

1988.9～1992.7 武漢工業大學硅工系玻璃專業，獲工學學士學位
1992.9～1995.7 武漢工業大學材料學碩士研究生，獲工學碩士學位
2000.9-2005.12 武漢理工大學材料學博士研究生，獲工學博士學位

四、工作經歷  

1995.7～1998.8 武漢工業大學材料學院玻璃教研室，教師
1998.9～2001.3 武漢理工大學無機非金屬材料實驗教學中心
2001.4～2011.10 武漢理工大學硅酸鹽材料工程教育部重點實驗室
2011.11~        硅酸鹽建筑材料國家重點實驗室

五、研究領域（不多于3個）：

1、玻璃低能耗高效熔化機理及系統設計
2、玻璃與非晶態材料
3、光電功能材料及薄膜材料

六、科研項目（不多于5項）：

1、基于低能耗高效熔化性能的玻璃配合料質量控制機理研究，2014.1-2016.12，高等學校博士點科研基金，負責人
2、新一代浮法玻璃燃燒系統高效節能關鍵技術及裝備，2013.6-2015.6，湖北省重大科技創新計劃，負責人
3、隔熱抗輻射高檔浮法玻璃原料制備關鍵技術，2013.5-201.124，湖北省科技支撐計劃項目，技術負責人
4、優質浮法玻璃熔化關鍵技術的研究與開發應用，2012.8-201.12，4武漢市科技攻關項目，技術負責人
5、稀土摻雜硅酸鹽浮法玻璃的組成與工藝性能的研究，2012.9-2015.12，企業委托項目，負責人

七、代表性論文及著作（不多于10項）：

1. 韓建軍，張一，趙修建，周學東，消除玻璃邊緣微裂紋提高玻璃強度的方法，發明專利，ZL 200910272606.Z
2. 胡開文,呂鑫,韓建軍,謝俊,趙修建. 玻璃配合料懸浮熔化的方法, 發明專利，ZL201210352264.4
3. 謝俊,呂鑫,胡開文,韓建軍,趙修建. 一種低紫外透過率的綠色浮法玻璃, 發明專利，ZL201210384972.6
4. 謝俊,呂鑫,胡開文,韓建軍,趙修建, 一種太陽能用超白超強浮法玻璃,發明專利，ZL201210384991.9
5. 胡開文,呂鑫,韓建軍,謝俊,趙修建. 新型環保節能懸浮熔融裝置,實用新型專利，ZL201220352565.2
6. Zhujun Zhou, Moo-Chin Wang, Jianjun Han, Feng Xu, XiuJian Zhao, Effect of heat treatment on 7Na2O–23B2O3–70SiO2 glass, Ceramics International 2011, (37): 1769-1773.
7. 毛雨, 韓建軍, 趙修建, 任媛媛, 周竹君，大孔徑無裂紋多孔玻璃基片的制備，材料科學與工程學報，2012,30(1): 80-83.
8. 任媛媛; 韓建軍; 毛雨; 袁啟華; 趙修建, 多孔玻璃粉的制備及其在玻璃基板上的粘接, 材料科學與工程學報，2012,30(1): 89-92.
9. Yu mao,jianjun han,zhujun zhou,xiujian zhao,moo-chin wang. Fabrication of a nanoporous na2o-b2o3-sio2 glass plate with controlled pore size. Eur. J. Glass Sci. Technol. B. 2013. 54(4): 187-194.
10. 劉昊,阮健,韓建軍,趙修建.綠色釩酸鹽熒光粉Ca5Mg4(VO4)6的制備和發光性能,硅酸鹽學報.2013.41(3):334-341.

八、聯系方式：

1、Tel：027-87651856 13507119785
2、E-mail：hanjj@whut.edu.cn
3、工作地址（實驗室）：硅酸鹽建筑材料國家重點實驗室（武漢理工大學）趙修建教授研究室
 
 
 
1.Name：Han jianjun
2.Brief introduction：
(1) Date of birth：1970.9
(2) Degree：Ph.D
(3) Title：Professor
(4) Working department：Science and technology development Department(WHUT)，State Key Laboratory of Silicate Materials for Architectures
3.Education experience(after entering university)
1988.9～1992.7   Wuhan University of Technology, BS
1992.9～1995.7  2001.09-2004.06 Wuhan University of Technology, MS
2000.9-2005.12           Wuhan University of Technology, Ph.D
4.Working experience:
1995.7～1998.8 glass department，Wuhan University of Technology;
1998.9～2001.3 Inorganic nonmetallic materials experiment teaching center, Wuhan University of Technology;
2001.4～ 2011.10  Key Laboratory of Silicate Materials Science and Engineering (Wuhan University of Technology),Professor;
2011.11~        Science and technology development Department(Wuhan University of Technology), Professor;
5.Research field(no more than 3):
(1)、Low energy and high efficient glass melting mechanism
(2)、Glass and amorphous material
(3)、Photoelectric functional material and thin-film materials
6.Research project(no more than 5):
(1) Research on glass batch quality control mechanism for low energy and high melting efficient, 2014.1-2016.12, Doctoral Program of Higher Education .
(2) Research on high efficiency and energy saving equipment for a new generation float glass combustion system, 2013.6-2015.6，The project of key technology innovation project of Hubei Province.
(3) Research on glass melting efficient and energy saving key technology , equipment for antiradiation glass, 2013.5-2014.12， Hubei province science and technology support program.
(4) Research on high quality float glass melting  technology and application,2012.1-2014.12, Wuhan Key project of science and technology.
(5) Research on the composition and process performance of rare earth doped silicate float glass, 2012.9-2015.12，Enterprise commissioned.
7.Representative papers and works(no more than 10):
(1)Han jianjun, Zhang yi, Zhao xiujian, Zhou Xuedong. Methods for eliminating glass micro cracks increase glass strength,Number：ZL2009 1 0272606.X。
(2)Hu kaiwen, Lv xin, Han jianjun, Xie jun, Zhao xiujian. Glass batch levitation melting method, Number:ZL201210352264.4.
(3)Hu kaiwen, Lv xin, Han jianjun, Xie jun, Zhao xiujian.New type of environmental protection and energy saving levitation melting equipment, Number:ZL201220352565.2
(4)Xie jun, Lv xin, Hu kaiwen, Han jianjun, Zhao xiujian.High strength and white float glass for solar cell ,Number：ZL201210384991.9。
(5)Han jianjun, Xu feng, Zhao xiujian, Ruan jian,preparation method form a purple stereoscopic pattern of colorless transparent glass material，Number：ZL 2006 1 0018602.5。
(6)Zhujun Zhou, Moo-Chin Wang, Jianjun Han*, Feng Xu, XiuJian Zhao, Effect of heat treatment on 7Na2O–23B2O3–70SiO2 glass, Ceramics International.2011.(37):1769-1773.
(7)Mao yu, Han jianjun, Zhao xiujian, Ren yuanyuan, Zhou zhujun.preparation of porous glass substrate with Large aperture and no crack.Journal of materials science and engineering.2012.30(1):80-83.
(8)Ren yuanyuan, Han jianjun, Mao yu, Yuan qihua, Zhao xiujian.Preparation of Porous Glass Powder and its Adhesion with glass Substrate. Journal of materials science and engineering.2012,30(1): 89-92.
(9)Yu mao, jianjun han, zhujun zhou, xiujian zhao, moo-chin wang. Fabrication of a nanoporous na2o-b2o3-sio2 glass plate with controlled pore size. Eur. J. Glass Sci. Technol. B. 2013. 54(4): 187-194.
(10)Liu hao, Ruan jian, Han Jianjun, Zhao xiujian. Preparation and photoluminescence properties of green-emitting vanadate phosphor Ca5Mg4(VO4)6.Journal of the Chinese ceramic society.2013.41(3):334-341.
Writing：
Han jianjun, Zhao xiujian, Lv xin, Xu lin. Float glass melting operation（six copies）.Published by Wuhan University of technology. ISBN:9787562943709
8.Contact information:
1、Tel：13507119785,027-87651856
2、E-mail：hanjj@whut.edu.cn
3、Location of lab: State Key Laboratory of Silicate Materials for Architectures